System Commands; Subsystem Syntax - Ametek Sorensen XG Operation Manual

SYSTEM COMMANDS

Subsystem Syntax

SYSTem
:COMMunicate
:LAN
:ADDRess
:APPLy
:CLASs
:DEFault
:DESCription
:DNSaddress
:GWADdress
:PASSword
:PORT
:MACAddress
SYSTem:COMMunicate:LAN:ADDRess
This command will set the LAN IP address. The query format returns the IP address
set. To query the actual IP address used by the LAN interface (in case the IP address
is not static but assigned by a DHCP server), the NCON parameter (Network
Connection Setting) must be added to the query. The default value is 0.0.0.0.
Command Syntax
Parameters
Example
Query Syntax
Returned Parameters
SYSTem:COMMunicate:LAN:APPLy
This command will apply the changes in LAN setting. The controller will go to reset
condition and the new LAN setting will take effect.
Command Syntax
Parameters
Example
Query Syntax
Returned Parameters
SYSTem:COMMunicate:LAN:CLASs
This command will set the number of host address bits or a class. The query format
returns the number of bits set. To query the actual number of bits used by the LAN
interface (in case the IP address is not static but assigned by a DHCP server), the
M370430-01 Rev B
The system commands control the system-level functions of the
power source.
setting
SYSTem:COMMunicate:LAN:ADDRess <NRF>
ddd.ddd.ddd.ddd <IP address>
SYST:COMM:LAN:ADDR 255.255.167.2
SYST:COMM:LAN:ADDR?
SYST:COMM:LAN:ADDR? NCON
<CRD>
SYSTem:COMMunicate:LAN:APPLy
none
SYST:COMM:LAN:APPL
no query for this command
none
Communications Options
Set LAN IP address
Apply the change in setting
Set LAN Host bits
Set LAN to a default known
Set user description
Set LAN DNS address
Set LAN Gateway
Set LAN password
Set LAN socket port address
Read the MAC address
6
6-61