Programming Current Output Preset - Ametek Sorensen XG Operation Manual

4.
5.
Important: This single front panel operation affects both power on and
output enable. However, when using SCPI, there is a separate command
for each.
The SCPI command to query or enable/disable the 0 Voltage
Output Preset at power-on is:
[:]SYSTem[<channel>]:PON:VOLTage
The SCPI command to query or enable/disable the 0 Voltage
Output Preset upon output enable is:
[:]SYSTem[<channel>] :PON:ENAble:VOLTage

Programming Current Output Preset

To Enable/Disable automatic reset to 0 Amps:
1.
2.
3.
4.
5.
Important: This single front panel operation affects both power on and
output enable. However, when using SCPI, there is a separate command
for each.
The SCPI command to query or enable/disable the 0 Current
Output Preset at power-on is:
[:]SYSTem[<channel>]:PON:CURRent
The SCPI command to query or enable/disable the 0 Current
Output Preset upon output enable is:
[:]SYSTem[<channel>] :PON:ENAble:CURRent
M370430-01 Rev B
Turn to display or
Press to commit the selected setting.
Turn the rotary Adjust/Enter control to PRT and press.
Turn again until
Press to display
Turn to display
Press to commit the selected setting.
.
{?|ON|OFF}
{? |ON|OFF}
is displayed.
.
or .
{?|ON|OFF}
{? |ON|OFF}
Local Operation
3
3-37