Analog Programming (Apg) Connector J1; Figure 4-1 Apg Connector Terminals - Ametek Sorensen XG Operation Manual

Analog Programming (APG) Connector J1

Jumper

Figure 4-1 APG Connector Terminals

Table 4-3 APG Pins and Functions J1
Pin Reference
J1.1 +SNS Positive (+)
J1.2 +LS Positive (+)
J1.3 -NC
J1.4 -NC
J1.5 -LS Negative (-)
J1.6 -SNS Negative (-)
J1.7 COM Analog Common
J1.8 COM Analog Common
M370430-01 Rev B
Analog Programming (APG) and Isolated Analog Programming (ISOL)
The APG connector is an 18-pin connector. See Figure 4-1.
The APG connector provides access to the following functions:
Sense control
Analog programming and monitoring.
Jumper
Function
Sense
Jumper. Factory default condition.
Local Sense
Local Sense
Jumper. Factory default condition.
Sense
Same as power supply negative sense (-SNS)
Same as power supply negative sense (-SNS)
4
4-5