O Utput C Ontrol - Ametek Sorensen XG Operation Manual

Table A-3 SCPI Commands for Output Control
Function SCPI Command
[[:]]SOURce[<channel>]]:COMBine:CSHare
Set Current
[: MODE]
Sharing Mode
[[:]SOURce[<channel>]]:CURRent[:LEVel]
Set
[:IMMediate][:AMPLitude]
(Immediate)
Current Set
point
[:]SOURce:POWer:LEVel
Set Constant
1
Power Set
point
[:]SOURce:POWer:MODe
Set Constant
1
Power Mode
[[:]SOURce[<channel>]]:VOLTage[:LEVel]
Set
[:IMMediate][:AMPLitude]
(Immediate)
Voltage Set
point
[[:]SOURce[<channel>]]:VOLTage:PROTect
Set Over
ion[:OVERvoltage][:LEVel]
Voltage
Protection
Level
[[:]SOURce[<channel>]]:VOLTage:PROTect
Set Under
ion:UNDer[:LEVel]
Voltage
Protection
Level
1
version 2.21 and higher
Parameter and
Description Range
Set the unit to operate in the ?|CONTroller
current share controller or |SLAVe
slave mode. If only a single
unit is being used it should be
set to controller.
Set current set point ?|<Current Set
(immediate) Point>|MAXimum|
MINimum
Set constant power set point ?|<Power Set Point> Yes
(immediate)
Set constant power mode ?|ON|OFF
(Enable/Disable)
Change voltage set point ?|<Voltage Set
(immediate) Point>|MAXimum|
MINimum
Set the over voltage ?|<OVP Set
protection level. Point>|MAXimum|
MINimum
Set the under voltage ?|<UVP Set
protection level. Point>|MAXimum|
MINimum
Query
Yes
Yes
Yes
Yes
Yes
Yes