New Hardware Wizard, - Ametek Sorensen XG Operation Manual

9.
10. On the next screen, enter the file path "C:\FTDI" and click
11. On the next screen, select "Driver Files Search Results" and
12. In Completing the Found New Hardware Wizard, see Figure
Figure 5-9 Completing the New Hardware Wizard
This completes the first part of the installation during which the USB to
serial converter is installed. The second part involves the installation of
a serial port, which should follow automatically once the converter
installation is complete. Installation of the serial port does not require
any user intervention.
Verifying Installation
Once the installation of the serial port has completed, verify that the
installation has been successful by looking under Device Manager of the
System Properties screen. The device should have installed as a USB
Serial Port (COMx) attached to USB High Speed Serial Converter.
M370430-01 Rev B
In the Locate Driver Files dialog box, in the field Optional
Search Locations, select Specify A Location and click Next.
OK.
click Next.
5-9, click Finish to complete the installation.
Remote Operation
5-11
5