Configuring The Device Using Deviceinstaller; Folder Window - Ametek Sorensen XG Operation Manual

Communications Options
2.
Figure 6-11 Select Installation Folder Window
3.
4.

Configuring the Device Using DeviceInstaller

The DeviceInstaller displays a list of the XG/XTR units with the ENET
option that are on the network. When the DeviceInstaller initially starts,
the device list is empty. Devices may be added by performing a search
for the devices on the network or by adding them manually.
Selecting a Network Adapter
After the installation of DeviceInstaller to your PC, you must select
which network adaptor you wish the DeviceInstaller to use for all its
network communications.
6-10
Click Next to open the Select Installation Folder window.
The Select Installation Folder window prompts for a destination
folder for the installation.
Click Next to begin the installation.
The Installation Complete window displays when the installation
is finished.
Click Close to exit.
M370430-01 Rev B