Table 5-11 Oper Ations; R Egister - Ametek Sorensen XG Operation Manual

Remote Operation
Table 5-11 OPERation Status Register
Bit Bit Weight Bit Name
0 1 CALibrating
1 2 SETTling
2 4 RANGing
3 8 SWEeping
4 16 MEASuring
5 32 Waiting for Arm
6 64 Waiting for Trigger
7 128 CORRecting
8 256 Not Used
9 512 SHUTdown Summary
10 1024 Local Lockout
11 2048 Current Share Summary Reflects the summary of the CSHare Sub-Register.
12 4096 Constant Voltage Mode
13 8192 Constant Current Mode
14 16384 Program Running
5-40
Description
Indicates that the supply is in CALibration Mode.
Not implemented
Not implemented
Not implemented
Not implemented
Not implemented
Not implemented
Not implemented
Not Used
Reflects the summary of the SHUTdown
Sub-Register.
Front panel lockout
Reflects the output mode of the supply.
Reflects the output mode of the supply.
Indicates if an Autosequence program is currently
running.
The operation shutdown status register describes the cause of the
power supply shutting down the output. More than one bit may be
active and multiple actions will be required to restart the unit. The
protection shutdown sub-register indicates which protection
mechanisms have caused the power supply to shutdown.
M370430-01 Rev B