Voltage-Controlled Voltage Isol Setup - Ametek Sorensen XG Operation Manual

Voltage-Controlled Voltage ISOL Setup

Activating ISOL Programming Voltage Mode
To activate ISOL programming voltage mode with an external
voltage source:
1.
2.
3.
4.
5.
Deactivating ISOL Voltage Mode
To deactivate the ISOL voltage mode:
1.
2.
3.
4.
M370430-01 Rev B
Analog Programming (APG) and Isolated Analog Programming (ISOL)
Turn the 9-position mode control to the VAP position or press
the rotary Adjust/Enter control if the mode control is already
at the VAP position.
is displayed on the output voltage display.
Turn rotary Adjust/Enter control to select
source from isolated connector).
Press the rotary Adjust/Enter control to commit the selected
mode. is displayed on the output voltage display.
Select the input source level using the rotary Adjust/Enter
control.
Once the desired level has been selected, press the rotary
Adjust/ Enter control to commit the change.
The display will return to the normal display.
Turn the 9-position mode control to the VAP position or press
the rotary Adjust/Enter control if the mode control is already
at the VAP position.
is displayed on the output voltage display.
Turn the rotary Adjust/Enter control to select
Press the rotary Adjust/Enter control to commit the change.
The display will return to the normal display.
(voltage
.
4-23
4