Analog Programming (APG) and Isolated Analog Programming (ISOL)
Voltage-Controlled Current APG Setup
Activating APG Current Mode
To activate APG current mode using an external voltage source:
1.
2.
3.
4.
5.
Deactivating APG Current Mode
To deactivate the APG current mode:
1.
2.
3.
4.
4-12
Turn the 9-position mode control to the CAP position or press
the rotary Adjust/Enter control if the mode control is already
at the CAP position.
is displayed on the output voltage display.
Turn the rotary Adjust/Enter control to select source
(Voltage source from non-isolated connector).
Press the rotary Adjust/Enter control to commit the selected
mode.
is displayed on the output voltage display.
Select the input source level using the rotary Adjust/Enter
control.
Once the desired level has been selected, press the rotary
Adjust/ Enter control to commit the change.
The display will return to the normal display.
Turn the 9-position mode control to the CAP position or press
the rotary Adjust/Enter control if the mode control is already
at the CAP position.
is displayed on the output voltage display.
Turn the rotary Adjust/Enter control to select
Press the rotary Adjust/Enter control to commit the change.
The display will return to the normal display.
.
M370430-01 Rev B