C Able With Db-25 P Inout - Ametek Sorensen XG Operation Manual

Remote Operation
Figure 5-4 RS-232 Communication Cable with DB-25 Pinout
Completing the Setup
To complete the setup:

5-6
TX
RX
GND
Configure the XG/XTR to use the 232 remote interface and set up
the terminal that will be used on the connected PC.
See the sections entitled"Selecting the Appropriate
Communication Port" on page 5-24 and "Terminal Configuration"
on page 5-21 for more details.
M370430-01 Rev B