C Ommands - Ametek Sorensen XG Operation Manual

Table A-9 System Commands (Continued)
[:]SYSTem[<channel>]:PROTection:LATCh
Set Alarm
Output Latches
Table A -10 Status Commands
Function SCPI Command
[:]STATus[<channel>]:OPERation :CONDit
Query
ion?
Operation
Status
Condition
Register
[:]STATus[<channel>]:OPERation:ENABle
Set Operation
Status Enable
Register
[:]STATus[<channel>]:OPERation[:EVENt]
Query
?
Operation
Status Event
Register
[:]STATus[<channel>]:OPERation
Set Operation
:NTRansition
Status
Negative
Transition
Register
Sets the Alarm Output ?| <Sum of output
Latches. See Table 3-6 on latch flags>
page Table 3-6.
Parameter and
Description Range
Query the Operations
Condition Register. See
Table 5-11 on page 5-40.
Access the Operations Enable ?|<Enable Flags -(0–
Register. See Table 5-11 on 65535)>
page 5-40.
Query the Operations Event
Register. See Table 5-11 on
page 5-40.
Access the Operation ?|<Transition Flags -
Negative Trans Filter (0–65535)>
Register. See Table 5-11 on
page 5-40.
Yes
Query
Yes
Yes
Yes
Yes