T Erminal C Onnection - Ametek Sorensen XG Operation Manual

End of Message
The end of message is the Carriage Return character (ASCII 13,
0x0D).The power supply ignores the Line Feed (ASCII 10, 0x0A)
character.
Setting Up a HyperTerminal Connection
To set up a HyperTerminal connection:
1.
Figure 6-20 HyperTerminal Connection
M370430-01 Rev B
Start Windows HyperTerminal by clicking Start >All
Program >Accessories > Communications > HyperTerminal.
See Figure 6-20.
Communications Options
6-17
6