Location Requirements - Ametek Sorensen XG Operation Manual

Location Requirements

Install the power supply in a location that meets the following requirements:
Condition Description
Clean The power supply should not be exposed to metal filings or any other form of
conductive contamination.
Cool The ambient air temperature should be between 0 °C–50 °C (32 °F–122 °F) for
best performance.
Ventilated Whether operating the power supply in a rack or on a bench, allow air to reach
the ventilation inlets on the front and rear of the unit for cooling. The direction of
airflow is from the front to the back of the unit. Ventilation space at the top,
bottom or sides of the power supply is not required
WARNING: Shock hazard
Ensure that any mounting screws do not penetrate more than 1/8 in. (3.0
mm) into the bottom and/or the back of the unit.
M370430-01 Rev B
Rack Mount Options and Installation Instructions
Figure D-2 Full Rack Mount Kit Option
D-3