Step 2: Location And Mounting; Rack Mounting; Purchasing Rack Mount Kits; Ventilation - Ametek Sorensen XG Operation Manual

Installation

Step 2: Location and Mounting

The power supply may be rack-mounted or used in benchtop applications.

Rack Mounting

The XG/XTR 850 Watt power supply is designed to fill half of a standard
19 inch (483 mm) equipment rack. The XG/XTR 1500 and 1700 Watt
power supplies are designed to fill a standard 19 inch (483 mm) equipment
rack.
Units can be combined with the same models in the 850 W or 1500 and
1700 W series for customer applications.

Purchasing Rack Mount Kits

Contact Customer Service (see "Contact Information" on page i) about
purchasing the Rack Mount Kit options. For a list of the part numbers, see
Appendix D
different rack mount options are provided with the rack mount kits.
For product support, visit www.programmablepower.com and
navigate to the DC Power Supplies page.

Ventilation

Whether operating the power supply in a rack or on a bench, allow air to
reach the ventilation inlets on the front and rear of the unit for cooling. The
direction of airflow is from the front of the unit to the back of the unit.
Ventilation space is not required at the top, bottom or sides of the power
supply.
2-4
Rack Mount Kit Options
. Installation information for the
M370430-01 Rev B