Ametek Enet Test Utility; Installing The Ametek Enettest Utility - Ametek Sorensen XG Operation Manual

Communications Options
AMETEK E
NET

Installing the AMETEK EnetTest Utility

1. Go to the folder for LXI Discovery Browser and ENet Test Utility.
2. From there go to the EnetTest directory.
3. Go to the Disk1 directory.
4. In the Disk1 directory select the Setup application. A window similar to the
following diagram should appear.
6-42
T UTILITY
EST
In addition to the AMETEK LXI Discovery Browser, AMETEK
also provides another useful utility: the AMETEK EnetTest Utility.
This software application provides an interface for sending SCPI
commands to a device and receiving its responses over the
Ethernet.
The software for the XTR can be downloaded from the AMETEK
Programmable Power website.
M370430-01 Rev B