Rack Mount Options And Installation Instructions; Rack Mount Kit Options; Xg/Xtr Single (Half Rack) And Dual (Full Rack - Ametek Sorensen XG Operation Manual

Rack Mount Options and Installation Instructions

Rack Mount Kit Options

Table 7-1describes the options available for rack mounting the power supply and provides the
part numbers for each option.
Table 7-1 Rack Mount Options
Unit Option A: Rack Mount with Rails
XG Single RM-S-XG2
XG Dual RM-D-XG2
XTR Single RM-S-XTR2
XTR Dual RM-D-XTR2

XG/XTR Single (Half Rack) and Dual (Full Rack)

Figure shows the rack mount kit options for installing the XG/XTR into a half rack and a full
rack. Note that the 850 Watt units are the only units that can be installed in either; all other units
can be installed in the half rack only.
Figure D-1 Single (left,) and Dual (right) Half Rack Mount Kit Options
D-2
and RM-XG2
(Fig D-1, left)
and RM-XG2
(Fig D-1, right)
and RM-XTR2
(Fig D-1, left)
and RM-XTR2 RM-D-XTR2 (
(Fig D-1, right)
Option B: Rack Mount with Slides
RM-S-XG2 (
Table 7-2, page D-7)
RM-D-XG2 (
Table 7-2, page D-7)
RM-S-XTR2 (
Table 7-2, page D-7)
Table 7-2, page D-7)
M370430-01 Rev B