Table 5-10 Standarde; S Tandard E Vent S Tatus R Egister - Ametek Sorensen XG Operation Manual

Remote Operation
Figure 5-20 summarizes the Standard Event Status Register.
Standard Event
Status Register
Operation Complete
Not Used
Query Error
Device Dependent Error
Execution Error.
Command Error
Not Used6
Power On
Figure 5-20 Summary of Standard Event Status Register
Table 5-10 Standard Event Status Register
Bit Bit Weight Bit Name
0 1 Operation Complete
(OPC)
1 2 Request Control (RQC)
2 4 Query Error (QYE)
3 8 Device Dependent Error
(DDE)
4 16 Execution Error (EXE)
5-36
SESR
Summary
Bit
(SESR)
Description
Set if * OPC command has been received and all
pending operations have been completed.
Not implemented. Always set to 0.
Not implemented.
Set if there is a device-specific error.
See "Device-Specific Error List" on page B-5 for a
list possible error codes and descriptions.
Set if a program data element, following a header,
was evaluated by the power supply as outside of its
legal input range, or is otherwise inconsistent with the
power supply's capabilities. Suggests that a valid
program message could not be properly executed due
to some power supply condition.
See "Execution Error List" on page B-4 for a list of
possible error codes and descriptions.
Status Byte
Register
Not Used
Not Used
Error/Event Queue Status
Flag
QUEStionable Status
Summary Bit
Not Used
OPERation Status
Summary Bit
M370430-01 Rev B
MSS
Summary
Bit