Enet Cros-Cable; Enet C Onnector And Led S - Ametek Sorensen XG Operation Manual

Communications Options
Figure 6-4 Scheme of ENET Cross-Cable
ENET Connector
The XPort® ENET connector is located on the rear panel of the power
supply. See Figure 6-5. At the top left corner is the link LED, and at the
top right corner of the connector is the activity LED. See Table 6-2 for a
description of their colors and what each indicates.
Figure 6-5 XPort® ENET Connector and LEDs
XPort™ LEDs
The device contains two bi-color LEDs built into the front of the
XPort™ connector. See Figure 6-5.
Table 6-2 Description of LEDs
6-4
TX+
1
TX-
2
RX+
3
4
5
RX-
6
7
8
LED
Link LED (Left side)
Activity LED (Right side) Off
Color Description
Off No link
Amber 10 Mbps
Green 100 Mbps
No activity
Amber Half-duplex
Green Full-duplex
M370430-01 Rev B
1
2
3
4
5
6
7
8