User Setting Memory Locations; Saving User Setting Memory Locations; Table 3-8 User Accessible - Ametek Sorensen XG Operation Manual

Local Operation

User Setting Memory Locations

There are three user setting memory locations available for storing
frequently used configurations. These user setting memory locations
help to facilitate multiple users of an XG/XTR power supply who have
different setups or when multiple loads are used that have different
requirements. Table 3-8 lists the values that are stored in each user
setting memory location.
Table 3-8
Voltage Setpoint
Current Setpoint
Voltage Output Protection
Current Output Protection
Over Voltage Protection (OVP)
Over Temperature Protection (OTP)
Autostart OUTPUT ENABLE Main
Autostart OUTPUT ENABLE Aux
Foldback Mode
Foldback Delay
Shutdown Logic
Voltage Analog Programming (VAP) Mode
Voltage Analog Programming (VAP) Level
Current Analog Programming (CAP) Mode
Current Analog Programming (CAP) Level
Current Sharing Mode
Alarm Latches
Front Panel Timeout

Saving User Setting Memory Locations

To save user setting memory locations:
1.
2.
3.
4.
3-40
User Accessible Saved/Recalled Settings
Turn the 9-position mode control to the SAV position.
is displayed on the output voltage display with a number
indicating a preset position which is displayed on the output current
display.
Turn the rotary Adjust/Enter control to select a preset position
from 1 to 3.
Press the rotary Adjust/Enter control.
done is displayed on the output voltage display.
The setting has now been saved to the selected user setting
memory location.
Voltage Setpoint
M370430-01 Rev B