Summit Family of Switches
NOTE
See the ExtremeXOS 12.0 Concepts Guide and the ExtremeXOS 12.0 Command Reference Guide for feature-specific
information about the Summit switches and for information regarding switch configuration.
NOTE
Switch certifications, safety labels, and serial numbers are located on the bottom of each unit.
Summit X250e Series Switches
The Summit X250e series switches include the following switches:
Summit X250e-24t Switch
●
Summit X250e-24p Switch
●
Summit X250e-48t Switch
●
Summit X250e-48p Switch
●
Summit X250e-24t Switch
The Summit X250e-24t switch is a compact unit 1.75 inches high (1 U) that includes the following:
Twenty-four fixed 10/100BASE-T ports (ports 1–24) that deliver high-density copper connectivity for
●
2.4 Gbps
Two combination ports (ports 25–26) that provide 10/100/1000 BASE-T or mini-GBIC connectivity
●
for 2 Gbps of copper or fiber connectivity
NOTE
For information about mini-GBICs, see
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for use with the EPS-160 External Power Module. When this
●
power supply is used with the Summit X250-24t switch, the power supplies (internal and redundant)
are fully fault tolerant and load-sharing. If one power supply fails, the other power supply will
provide sufficient power to operate the switch.
Summit X250e-24t Switch Front Panel
Figure 167
shows the front panel of the Summit X250e-24t switch.
242
"Mini-GBIC Interfaces" on page
Extreme Networks Consolidated ExtremeXOS Hardware Installation Guide
338.