Front View; Summit Switch Models - Extreme Networks Summit X250e Series Technical Specifications

Edge power over ethernet (poe) and non-poe switch providing intelligent 10/100base-t connectivity
Hide thumbs Also See for Summit X250e Series:
Table of Contents

Advertisement

Extreme Networks Data Sheet: Summit X250e Series
Accessories
Summit X250e Series Redundant PSUs
EPS-160 and EPS-T
EPS-160 is the redundant AC Power Supply for lower power consuming AC
PSU-based Summit switches. The EPS-T power tray is required to rack-mount
this external power supply. EPS-T power tray can take up to two EPS-160
power modules, and each EPS-160 works individually. EPS-160 comes with a
DC output cable to connect between the Summit switch and EPS-160.
EPS-500
EPS-500 is the redundant AC Power Supply for higher power consuming AC
PSU-based switches including PoE-enabled switches. EPS-500 is one rack
unit height and works in standalone mode. EPS-500 can be rack-mounted in
a regular 19 inch rack system. EPS-500 comes with a DC output cable to
connect between the Summit switch and EPS-500.
EPS-600LS and EPS-C
EPS-600LS is a power module that works with the EPS-C External Power
System Chassis. EPS-C has three slots for EPS-600LS and one DC output to
connect to high-density PoE Summit switches. Depending upon the number
of EPS-600LS installed in EPS-C, it can provide: 1) Redundant configuration
for up to 370 watts of PoE power with one EPS-600LS installed; 2) Non-
redundant configuration for up to 740 watts of PoE power when two
EPS-600LS are installed; and 3) Redundant configuration for up to 740 watts
of PoE power when three EPS-600LS are installed. EPS-C comes with a DC
output cable to connect between the Summit switch and EPS-C with
EPS-600LS installed.
EPS-150DC and EPS-T2
EPS-150DC is the redundant DC Power Supply for DC PSU-based Summit
switches. The EPS-T2 power tray is required to rack-mount this external
power supply. EPS-T2 power tray can take up to two EPS-150DC power
modules, and each EPS-150DC works individually. EPS-150DC comes with a
DC output cable to connect between the Summit switch and EPS-150DC.
Redundant PSU Compatibility Matrix

Summit Switch Models

Summit X250e-24t/48t/24x
Summit X250e-24p
Summit X250e-48p/48p-TAA
Summit X250e-24tDC/48tDC/24xDC
Summit Switch
Part Number(s)
External Redundant PSU options
15101/15103/15109
EPS-160 power module (10907) with EPS-T (10906)
15105
EPS-500 external power supply (10911)
15107/15108
EPS-C (10912) and EPS-600LS (10913)
15121/15122/15123
EPS-150DC power module (10909) with EPS-T2 (10910)
Technical Specifications

Front View

Front View
Rear View
Front View
Rear View
Configured
View
Front View
Rear View
6

Advertisement

Table of Contents
loading

Table of Contents