Threshold; Threshold Sd-Ber; Threshold Sf-Ber - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Basic Configuration Volume II)
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
66 Confidential and Proprietary Information of ZTE CORPORATION

threshold

Use this command to set the threshold. Restore the default with
the no command.
Channelization configuration
threshold <value>
no threshold
<value>
It is applied only to ZXR10 GER.
This example describes how to set the threshold of channel CPOS3
to 10.
ZXR10(config)#controller cpos3_3/1
ZXR10(config-control)#threshold 10

threshold sd-ber

Use this command to set the signal BER threshold.
Interface configuration
threshold sd-ber < value >
< value >
SD threshold is 6 by default.
SD (10 bervalue) threshold shorter than SF(10 bervalue). It is
applied to POS and ATM interface
This example describes how to set the signal BER threshold as 4.
ZXR10(config)#int pos48_1/1
ZXR10(config-if)#threshold sd
ZXR10(config-if)#threshold sd-ber ?
<3-9> Sd-ber value
ZXR10(config-if)#threshold sd-ber 4

threshold sf-ber

Use this command to set the failure signal BER threshold.
Interface configuration
threshold sf-ber <value>
<value>
Ranging 0–100, 0 by default
Ranging 3–9, 6 by default
Ranging 3–9, 4 by default