Speed; Statis - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Basic Configuration Volume II)
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
62 Confidential and Proprietary Information of ZTE CORPORATION

speed

Use this command to set the speed of a 100 M interface to 10M or
100M. Restore the default with the no command.
Interface configuration

speed {10 | 100}

no speed
10
100
The default is 100Mbps.
This example describes how to set the speed of interface fei_6/1
to 10 Mbps.
ZXR10(config)#interface fei_6/1
ZXR10(config-if)#speed 10
speed {10 | 100 | auto}

statis

Use this command to set whether to make statistics on some type
of interfaces, such as Smartgroup.
Global configuration and interface configuration
statis {enable | disable}
enable
disable
This function is disabled.
It is applied to ZXR10 GER, ZXR10 T64E/T128 and ZXR10
T600/T1200.
� This example describes how to enable statistics on interface
smartgroup1 on ZXR10 GER.
ZXR10(config)#intrface smartgroup1
ZXR10(config-control)#statis enable
�
This example describes how to enable statistics on all interfaces
of ZXR10 T128.
ZXR10(config)#statis enable
Set the speed of the interface to 10 Mbps
Set the speed of the interface to 100 Mbps
Enables statistics on the interface or all
interfaces of the rack
Disables statistics on the interface or all
interfaces of the rack