Show Optical-Inform Detail - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Basic Configuration Volume II)
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instruction
58 Confidential and Proprietary Information of ZTE CORPORATION
Enable the optical module on the interface first, then it will display
the optical module information: optical-inform monitor {ena
ble | disable}.
This example shows how to cancel the link up alarm and the SNMP
TRAP information of the shielding interface fei_1/1, fei_1/2 and
fei_1/3.
ZXR10#Show optical-inform brief
Optical Optical
Interface Temperature Voltage
Name (Celsius)
------------------------------------------------------------
gei_2/1/21 12.00
gei_2/1/22 12.00
gei_2/1/23 12.00
gei_2/1/24 12.00
ZXR10#Show optical-inform brief
Optical Optical
Interface Temperature Voltage
Name (Celsius)
-------------------------------------------------------------
gei_2/1/23 12.00
Different displaying information for different optical modules. The
optical module information is provided by the drive.

show optical-inform detail

Use this command to display the optical module information: tem-
perature, voltage, circuit, sending and receiving power. It supports
the view of single port and veneer.
Privileged EXEC
show optical-inform detail [ temperature voltage current
rx-power tx-power ][ npc <slot>| interface <interface-nam
e>]
interface <
interface-name >
npc <slot>
temperature
voltage
current
rx-power
tx-power
It only supports the physical interface.
Enable the optical module on the interface first, then it will display
the optical module information: optical-inform monitor {ena
ble | disable}.
Current Tx Power
(Volts) (mA) (mW)
5.00 60.00 0.00
5.00 60.00 0.00
5.00 60.00 0.00
5.00 60.00 0.00
interface
Current Tx Power
(Volts) (mA) (mW)
5.00 60.00 0.00
the interface name
the slot number of the line card
the temperature of the optical module
the voltag of the optical module
the circuit of the optical module
the receiving power of the optical module
the sending power of the optical module
Rx Power
(mW)
1.00
1.00
1.00
1.00
gei_2/1/23
Rx Power
(mW)
1.00