Tug-2 T1 Clock Source; Tug-2 T1 Framing - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Basic Configuration Volume II)
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
70 Confidential and Proprietary Information of ZTE CORPORATION

tug-2 t1 clock source

Use this command to set the clock source of the T1 channel when
the CPOS3 interface is set to the SDH mode, and the AUG is in the
AU-3 mapping mode. Restore the default with the no command.
Channel configuration
tug-2 <tug-2-number> t1 <line> clock source {internal | line}
no tug-2 <tug-2-number> t1 <line> clock source
tug-2 <tug-2-numb
er>
t1 <line>
internal
<line>
Internal means the internal clock by default.
It is applied only to ZXR10 GER.
This example describes how to set the clock source of the T1 chan-
nel to the clock source.
ZXR10(config)#controller cpos3_3/1
ZXR10(config-control)#framing sdh
ZXR10(config-control)#aug mapping au-3
ZXR10(config-control)#tug-2 1 t1 1 clock source line

tug-2 t1 framing

Use this command to set whether the T1 channel shall work in the
frame mode and what the frame format is when the CPOS3 inter-
face is set to the SDH mode and the AUG is in the AU-3 mapping
mode.
Channelization configuration
tug-2 <tug-2-number> t1 <line> framing {unframe | frame |
esf | sf}
tug-2 <tug-2-numb
er>
t1 <line>
unframe
frame
tug-2 number, ranging 1–7
T1 number, ranging 1–4
Sets the internal clock as the clock source of
the T1 channel.
Sets the line clock as the clock source of the
T1 channel.
tug-2 number, ranging 1–7
T1 number, ranging 1–4
Sets the T1 channel to work in the unframe
mode.
Sets the T1 channel to work in the frame
mode.