Set Interface Multicast-Limit; Set Interface Negotiation - Zte ZXR10 8900 Series Command Reference Manual

Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Example
jumbo-frame

set interface multicast-limit

Use this command to set in batch the limit rate (in percent) to
multicast packets on Ethernet ports.
Global configuration
set interface multicast-limit <percent-value><port-list>
<percent-value>
<port-list>
This example describes how to set the limit rate to broadcast pack-
ets on ports fei_1/1, fei_1/2 and fei_1/3 to 80.
ZXR10(config)#set interface multicast-limit 80 fei_1/1-3
multicast-limit

set interface negotiation

Use this command to set auto-negotiation of Ethernet ports in
batch.
Global configuration
set interface negotiation {enable | disable}<port-list>
enable
disable
port-list
The auto-negotiation is enabled on all Ethernet interfaces.
This example describes how to enable auto-negotiation on ports
fei_1/1, fei_1/2 and fei_1/3.
ZXR10(config)#set interface negotiation enable fei_1/1-3
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Interface Configuration
Limit rate to multicast packets, ranging
1–100, 100 by default
Port list of the batch configuration
Enables auto-negotiation on Ethernet ports.
Disables auto-negotiation on Ethernet ports.
Specifies the port list of the batch
configuration.
49