Frametype; Framing - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Basic Configuration Volume II)
Syntax
Description
Defaults
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Purpose
Command Modes
Syntax
26 Confidential and Proprietary Information of ZTE CORPORATION
enable
disable
Flow control is disabled.
no flowcontrol and flowcontrol disable have the same func-
tion.
This example describes how to set the port fei_1/1 to disable flow
control.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#flowcontrol disable
set interface flowcontrol

frametype

Use this command to set frame format of E3 channel. Restore
default with the no command.
Channelization configuration
frametype {bypass | g751}
no frametype
bypass
g751
Frame format is bypass.
It is applied to ZXR10 GER and ZXR10 T64E/T128.
This example describes how to configure the frame format of CE3
channel as g751.
ZXR10(config)#controller ce3_3/1
ZXR10(config-control)#frametype g751

framing

Use this command to configure the framing mode. Delete all inter-
faces which are created on the specified mode with the no com-
mand.
Channelization configuration
framing {sonet | sdh}
no framing {sonet | sdh}
Configures an Ethernet port to enable flow
control
Configures an Ethernet port to disable flow
control
Sets frame format of e3 channel to bypass
Sets frame format of e3 channel to g751