Show Interface-Description - Zte ZXR10 8900 Series Command Reference Manual

Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Undersize: 0
Dropped : 8
MacRxErr : 0
Output:
Packets : 25
Unicasts : 0
Collision: 0
Total:
64B : 0
256-511B : 0 512-1023B : 0
ZXR10#
As shown above, the displayed domain and contents vary with
interfaces.
Field
gei_7/1 is
administratively down
gei_7/1 is up
line protocol is up
Description
Duplex
The port is electric
vlan
MTU
BW
MAC
Input, Output, Total

show interface-description

Use this command to display the description of administration sta-
tus, physical status and protocol status on an interface.
All modes
show interface-description [<port-name>]
<port-name>
If a port is designated, this command displays information of the
designated port. Otherwise, this command displays information of
all un-internal and non-null ports.
� This example shows that this command does not display infor-
mation of internal and null interface.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Interface Configuration
Oversize : 0
Fragments : 0
Multicasts: 0
65-127B : 58
Description
Whether the administration status of
the interface is available: down means
unavailable.
Whether the physical status of the interface is
available, and down means unavailable.
Whether the link layer protocol is available,
up means available and down, unavailable.
Description about the interface
Work mode of the interface: full or half duplex
Electrical or optical interface
VLAN information of the interface
MTU value of the interface.
Bandwidth of the interface
MAC address of the interface
Statistics of the interface
Port name
CRC-ERROR : 0
Jabber : 0
Bytes: 2888
Broadcasts: 2
LateCollision: 0
128-255B : 0
1024-1518B: 0
53