Ip Dhcp Snooping Information User-Configuration Policy; Ip Dhcp Snooping Max-User - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Basic Configuration Volume II)
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
102 Confidential and Proprietary Information of ZTE CORPORATION
show ip dhcp snooping information uniform
ip dhcp snooping information
user-configuration policy
Use this command to configure user configuration policy based on
uniform mode. It is used after configuring agent-format to ser-
configuration. Use the no command to delete the configuration.
Global configuration

ip dhcp snooping information user-configuration policy {

uniform | interface | VLAN }
no ip dhcp snooping information user-configuration policy
uniform
interface
VLAN
Interface mode
It is only applied to switches.
This example shows how to configure user configuration policy of
DHCP Relay Option 82.
ZXR10(config)#ip dhcp snooping information user-configuration
policy interface
ip dhcp snooping information user-configuration policy inte
rface
show ip dhcp snooping configure

ip dhcp snooping max-user

Use this command to set the maximum users that DHCP Snooping
supports.
Global configuration
ip dhcp snooping max-user <max-user>
no ip dhcp snooping max-user
Select the string of option 82 configured in
uniform mode to insert to DHCP packet
Select the string of option 82 configured in
interface mode to insert to DHCP packet
Select the string of option 82 configured on
the base of Layer 2 VLAN to insert to DHCP
packet