Tug-2 T1 Channel-Group Timeslots - Zte ZXR10 8900 Series Command Reference Manual

Defaults
Instructions
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
frame
crc
no-crc4
Framing in the crc4 mode
It is applied only to ZXR10 GER.
This example describes how to set the E1 channel to work in the
frame mode of crc4.
ZXR10(config)#controller cpos3_3/1
ZXR10(config-control)#framing sdh
ZXR10(config-control)#aug mapping au-4
ZXR10(config-control)#au-4 1 tug-3 1
ZXR10(config-control)#tug-2 1 e1 1 framing frame
ZXR10(config-control)#tug-2 1 e1 1 framing crc4
tug-2 t1 channel-group
timeslots
Use this command to create a T1 channel when the CPOS3 inter-
face is set to the SDH mode, and the AUG is in the AU-3 mapping
mode. Delete a T1 channel with the no command.
Channel configuration
tug-2 <tug-2-number> t1 <line> channel-group <channel-nu
mber> timeslots <timeslots>
no tug-2 <tug-2-number> t1 <line> channel-group <channel-
number>
tug-2 <tug-2-numb
er>
t1 <line>
channel-group
<channel-number>
timeslots <timeslo
ts>
It is applied only to ZXR10 GER.
This example describes how to create a T1 channel.
ZXR10(config)#controller cpos3_3/1
ZXR10(config-control)#framing sdh
ZXR10(config-control)#aug mapping au-3
ZXR10(config-control)#tug-2 1 t1 1 channel-group 1 timeslots 1-24
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 Interface Configuration
Sets the E1 channel to work in the frame
mode.
Sets the frame format to crc if the E1 channel
works in the frame format.
Sets the frame format to no-crc4 if the E1
channel works in the frame format.
TUG-2 number, ranging 1~7
T1 number, ranging 1~4
T1 channel number, 1 only
Time slot number. Timeslots 1~24 must be
assigned to a channel at one time.
69