Kick-Off Ip Dhcp Server User - Zte ZXR10 8900 Series Command Reference Manual

Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
valid to the DHCP relay process under specific configuration con-
ditions. Delete the DHCP user quota with the no command.
Interface configuration
ip dhcp user quota <limit-value>
no ip dhcp user quota
<limit-value>
No quota
For the DHCP Serve, the DHCP user quota restricts the maximum
number of DHCP users on the interface, and controls the number
of IP addresses indirectly.
For the DHCP relay, as the DHCP relay protocol does not support
the processing of DHCP user quota, which is invalid. However,
when the IP address of the DHCP relay is bound to the ARP, the
quota is valid after some processing.
This example describes how to set the user quota on the fei_2/1
interface to 50.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#ip dhcp user quota 50
show ip dhcp configure

kick-off ip dhcp server user

Use this command to make the on-line users off-line from the
server according to designated attribute(interface/MAC address/IP
address/ vlan ID/ invlan_ID/exvlan_ID).
Privileged EXEC
kick-off ip dhcp server user [[interface <inf_name>]|[mac
<mac_addr>[vrf-instance <vrf_name>]]|[ip <ip_addr>[vrf-in
stance <vrf_name>]]|[vlan <vlan_ID>]|[invlan <invlan_ID>[e
xvlan <exvlan_ID>]]|[exvlan <exvlan_ID>]]
<inf_name>
<mac_addr>
<vrf_name>
<ip_addr>
<vlan_ID>
<invlan_ID>
<exvlan_ID>
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 DHCP and DHCP SNOOPING Configuration
DHCP user quota on the interface, ranging 1
~ 2048
Layer 3 interface name
MAC address
VRF name
IP address
VLAN ID
Internal VLAN ID
External VLAN ID
105