Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instruction
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instruction
ip address dhcp
ip dhcp client lease
Use this command to set lease of dhcp client.
Interface configuration
ip dhcp client lease {<days>[<hours>][<minutes>]| infinite}
no ip dhcp client lease
<days>
<hours>
<minutes>
This command is used to set lease of dhcp client. The lease can
be specified as days, hours, minutes and infinite lease. This pa-
rameter is only used for applying the dhcp client lease. The lease
to obtain the IP address for dhcp client is determined by the dhcp
server configuration.
The platform version 4.8.22 supports this command.
It is only applied to 59 series switches.
This example shows how to set the client lease of dhcp client.
ZXR10(config-if)#ip dhcp client lease 1 2 3
ZXR10(config-if)#
ip address dhcp
ip dhcp client request
Use this command to set the parameter requesting list of dhcp
client.
Interface configuration
ip dhcp client request <option-name>
no ip dhcp client request <option-name>
<option-name>
This command is used to set the parameter requesting list of dhcp
client example. It requests all the options by default.
The platform version 4.8.22 supports this command.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 DHCP and DHCP SNOOPING Configuration
The days of client lease, in range of 0~365.
The hours of client lease, in range of 0~23.
The minutes of client lease, in range of 0~59.
The option name can be one of the following
keywords: tftp-server-address, static-route,
domain-name, dns-nameserver, or routerIt
requests all the options by default.
81