Defaults
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Example
Related
Commands
Purpose
Command Modes
Syntax
Null, that is, the sub option of DHCP OPT82 circuit-id is not con-
figured.
This example shows how to configure sub options of DHCP Relay
Option 82 circuit-id.
ZXR10(config)#ip dhcp relay information circuit-id "zxr10:vlan100:gei_1/1"
show ip dhcp relay information uniform
ip dhcp relay information
uniform remote-id
Use this command to configure sub option of DHCP OPT82 re-
mote-id based on uniform mode. Use the no command to delete
the configuration.
Global configuration
ip dhcp relay information uniform remote-id <remote-id stri
ng>
no ip dhcp relay information uniform remote-id
<remote-id string>
Null, that is, the sub option of DHCP OPT82 remote-id is not con-
figured.
This example shows how to configure sub options of DHCP Relay
Option 82 remote-id.
ZXR10(config)#ip dhcp relay information remote -id "zxr10:T64G001"
show ip dhcp relay information uniform
ip dhcp relay information
user-configuration policy
Use this command to configure user configuration policy based
on uniform mode. It is used after configuring agent-format to
ser-configuration. Use no command to delete the configuration.
Global configuration
ip dhcp relay information user-configuration policy {unif
orm | interface}
no ip dhcp relay information user-configuration policy
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 DHCP and DHCP SNOOPING Configuration
The string of option 82 remote-id configured
by the user
89