Show Ip Interface - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Basic Configuration Volume II)
Purpose
Command Modes
Syntax
Syntax
Description
54 Confidential and Proprietary Information of ZTE CORPORATION
ZXR10#sho interface-description null1
Interface AdminStatus
ZXR10#sho interface-description cpos3_5/1
Interface AdminStatus
� This example shows the description of interface fei_3/1.
ZXR10(config)#sho interface-description fei_3/1
Interface AdminStatus
fei_3/1
� This example shows the description of all interfaces.
ZXR10(config-if)#sho interface-description
Interface AdminStatus
fei_3/1
fei_3/2
fei_3/3
fei_3/4
fei_3/5
fei_3/6
fei_3/7
fei_3/8
loopback1
As shown above, the displayed domain and contents vary with
interfaces.
Field
interface
AdminStatus
PhyStatus
Protocol
Description

show ip interface

Use this command to display the status of the interface.
All modes
show ip interface [ brief [phy |<interface-name >|[{ begin
| exclude | include }<line>]]]|[<interface-name>]|[{ begin |
exclude | include }<line>]
brief
<interface-name>
PhyStatus Protocol
PhyStatus Protocol
PhyStatus Protocol
up up
PhyStatus Protocol
up up
up down
up down
up down
up down
up down
up down
up down
up up
Description
The existed interface
Shows the administration statues of the
interface. Up means available, and down
means unavailable.
Shows the physical statues of the interface.
Up means available, and down means
unavailable.
Shows the link layer protocol statues of the
interface. Up means available, and down
means unavailable.
Description information
Shows the brief information of the interface
Interface name
Description
Description
Description
up none
Description
up none
down none
down none
down none
down none
down none
down none
down none
up none