Byname; Cancel - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Basic Configuration Volume II)
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
12 Confidential and Proprietary Information of ZTE CORPORATION
This example describes how to set the limit percentage of port
fei_1/1 to broadcast packet to 10%.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#broadcast-limit 10
set interface broadcast-limit

byname

Use this command to configure the interface alias. Delete the in-
terface alias with the no command.
Interface configuration
byname <by-name>
no byname
<by-name>
There is no interface alias by default.
After configuring an alias for an interface, directly enter the con-
figuration mode of the interface with the alias.
This example describes how to set the alias of the interface fei_1/1
to ether1, and enter the configuration mode of the interface with
the alias.
ZXR10(config)#interface fei_1/1
ZXR10(config-if)#byname ether1
ZXR10(config-if)#exit
ZXR10(config)#interface ether1
ZXR10(config-if)#
interface

cancel

Use this command to shield the link up/link down alarm informa-
tion of the interface and SNMP TRAP information. Cacel the con-
figuration with the no command.
Interface configuration
cancel <up-down-type>
no cancel <up-down-type>
<up-down-type>
Not to shield the link up/link down alarm information of the inter-
face and SNMP TRAP information by default.
Interface alias, a string with 1~32 characters.
the link up/link down type of the interface