Kick-Off Ip Dhcp Relay User; Release Dhcp - Zte ZXR10 8900 Series Command Reference Manual

Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
show ip dhcp snooping database

kick-off ip dhcp relay user

Use this command to make the on-line users off-line from the Re-
lay according to designated attribute.
Privileged EXEC
kick-off ip dhcp relay user [[interface <inf_name>]|[mac
<mac_addr>[vrf-instance <vrf_name>]]|[ip <ip_addr>[vrf-i
nstance <vrf_name>]]|[vlan <vlan_ID>]|[invlan <invlan_ID
>[exvlan <exvlan_ID>]]|[exvlan <exvlan_ID>]]
<inf_name>
<mac_addr>
<vrf_name>
<ip_addr>
<vlan_ID>
<invlan_ID>
<exvlan_ID>
If this area is configured, it is enabled by default.
Administrator can make the on-line users off-line from the server
according to designated attribute in DHCP Relay mode. On the
distributed rack, when the administrator makes the on-line users
off-line from the server according to attribute of interface, the sys-
tem prompts to input the line card number.
This example shows how to make the user with MAC address
00c0.0000.000 off-line.
ZXR10#kick-off ip dhcp relay user mac 00c0.0000.0001
show ip dhcp relay user

release dhcp

Use this command to release the IP address that the specified in-
terface obtains.
Privileged EXEC
release dhcp <interface>
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 DHCP and DHCP SNOOPING Configuration
Layer 3 interface name
MAC address
VRF name
IP address
VLAN ID
Internal VLAN ID
External VLAN ID
107