Ip Dhcp Snooping Clear; Ip Dhcp Snooping Enable - Zte ZXR10 8900 Series Command Reference Manual

Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Instructions
Example
Related
Commands

ip dhcp snooping clear

Use this command to manually clear the entry in the DHCP SNOOP-
ING binding table.
Global configuration
ip dhcp snooping clear [<interface-number>]
<interface-number>
� The platform version 4.6.02 and upgrade versions support this
command.
� It is only applied to switch. Router series does not support this
command.
This example describes how to manually clear the entry in the
DHCP SNOOPING binding database.
ZXR10(config)# ip dhcp snooping clear fei_1/1
ZXR10(config)# ip dhcp snooping clear
ip dhcp snooping binding
ip dhcp snooping binding

ip dhcp snooping enable

ip dhcp snooping information option
ip dhcp snooping information format
ip dhcp snooping information policy
ip dhcp snooping vlan

ip dhcp snooping enable

Use this command to enable DHCP SNOOPING. Disable DHCP
SNOOPING with the no command.
Global configuration
ip dhcp snooping enable
no ip dhcp snooping enable
After the DHCP SNOOPING function is enabled in global mode, it
is still necessary to enable it in the VLAN.
This example describes how to enable DHCP SNOOPING in global
mode.
ZXR10(config)#ip dhcp snooping enable
ip dhcp snooping binding

ip dhcp snooping clear

ip dhcp snooping information option
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 DHCP and DHCP SNOOPING Configuration
Physical interface No., such as fei, gei, and
smartgroup
97