Set Interface Flowcontrol; Set Interface Jumbo-Frame - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Basic Configuration Volume II)
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
Example
48 Confidential and Proprietary Information of ZTE CORPORATION
This example describes how to set ports fei_1/1, fei_1/2 and
fei_1/3 to the full-duplex mode.
ZXR10(config)#set interface duplex full fei_1/1-3
duplex

set interface flowcontrol

Use this command to set flow control of Ethernet ports in batch.
Global configuration
set interface flowcontrol {enable | disable}<port-list>
enable
disable
<port-list>
The function of flowcontrol is disabled on all Ethernet ports.
This example describes how to enable flow control on ports fei_1/1,
fei_1/2 and fei_1/3.
ZXR10(config)#set interface flowcontrol enable fei_1/1-3
flowcontrol

set interface jumbo-frame

Use this command to set in batch whether the Ethernet ports shall
support jumbo frames.
Global configuration
set interface jumbo-frame {enable | disable}<port-list>
enable
disable
<port-list>
All Ethernet interfaces do not support jumbo frame.
This example describes how to enable ports fei_1/1, fei_1/2 and
fei_1/3 to support jumbo frames.
ZXR10(config)#set interface jumbo-frame enable fei_1/1-3
Enables flow control on Ethernet ports
Disables flow control on Ethernet ports
Port list of the batch configuration
Enables the Ethernet ports to support jumbo
frames
Disables the Ethernet ports to support jumbo
frames
Port list of the batch configuration