Show Ip Dhcp Snooping Ramble - Zte ZXR10 8900 Series Command Reference Manual

Syntax
Description
Instructions
Example
Purpose
Command Modes
Syntax
Instructions
Example
Related
Commands
uniform
interface<interface-n
ame>
vlan<vlan-id>
When no parameter is configured, the command displays all infor-
mation of DHCP option 82.
This example shows how to display all DHCP option 82 information
that user configured of DHCP SNOOPING.
ZXR10(config)#show ip dhcp snooping information
DHCP snooping information of all by user configuration are:
TYPE circuit-id-len
uniform 8
VLAN10 12
show ip dhcp snooping
ramble
Use this command to display the related parameters DHCP roam
configuration.
Global configuration

show ip dhcp snooping ramble

It is only applied to switches.
his example describes how to display the configuration information
below after starting DHCP roam function.
ZXR10(config)#ip dhcp snooping ramble
ZXR10(config)#show ip dhcp snooping ramble
Current DHCP snooping
ramble state: enable
ip dhcp snooping binding
ip dhcp snooping clear
ip dhcp snooping enable
ip dhcp snooping information option
ip dhcp snooping information format
ip dhcp snooping information policy
ip dhcp snooping vlan
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 DHCP and DHCP SNOOPING Configuration
Displays the information in the uniform
configuration mode.
Displays the information of DHCP Option 82
in a specified interface.
Displays the informationof DHCP Option 82 in
a layer-2 VLAN.
remote-id-len
9
0
user ramble state :
115