Snmp Configuration - InfoPrint 6500 Series User Manual

SNMP Configuration

Current Model Settings
SNMP Configuration
The SNMP Configuration form allows you to configure SNMP trap managers
and the e-mail alert features of the ethernet. It allows you to configure how
SNMP alerts are processed by a SNMP trap manager, an Unix syslog logging
daemon, and/or have e-mail notifications sent. Up to 10 SNMP trap managers
and e-mail recipients may be specified. Individual alerts fall into one of 12
alert group categories, providing the ability to filter alert notices as desired.
SNMP Manager Alert Posting Settings
Figure 20. SNMP Manager Alert Posting Configuration
Specifies whether alerts from the enabled alert group categories for this
configuration will be sent to the SNMP manager. If this option is enabled, the
following information must be entered:
SNMP Manager IP Address
Specifies the IP address of the SNMP trap manager.
UDP Port
Specifies the UDP port number used by the SNMP trap manager for receiving
trap messages. Acceptable values are 162, and 49152 through 65535
Community Name
Up to 15 character string specifying the trap community name.
59