InfoPrint 6500 Series User Manual page 28

Chapter 2
Configuration Tools
Kerberos Parameters
Kerberos is a wireless security scheme available when a symbol LA 4121
radio card is installed.
•
Kerberos Enable
•
•
•
Kerberos Password
•
•
•
•
Reset Kerberos Password
Reset Kerberos password to an empty string.
•
KDC Port Number
KDC (Key Distribution Center) port number is the 2-byte UDP/TCP port used
for Kerberos Communication.
•
•
•
Clock Skew
Sets the maximum allowable amount of time in seconds or minutes that
Kerberos authentication will tolerate before assuming that a Kerberos
message is valid.
•
•
NOTE: The submenu selected in Clock Skew Units will display on the Clock
28
Disable (default). Disable Kerberos authentication in the wireless
network interface.
Enable. Enable Kerberos authentication in the wireless network
interface.
Kerberos Password (01–15). First 15 characters of the Kerberos
password (maximum number of characters is 40).
Kerberos Password (16–30). Characters 31 to 40 of the Kerberos
password (maximum number of characters is 40).
Kerberos Password (31–40). Characters 31 to 40 of the Kerberos
password (maximum number of characters is 40).
88 (default)
0 - 65535
Clock Skew Units. The range for Seconds is 60-900, and the default
is 300. The range for Minutes is 1-15, and the default is 5.
Clock Skew (SEC)
Skew (SEC) menu. For example, if you select Minutes, the Clock
Skew (SEC) menu name will change to Clock Skew (MIN).