13
Command Shell Overview
The ethernet comes with an in-depth command shell called npsh. It allows
you to manipulate objects like destinations, I/O ports, and models and
provides monitoring and troubleshooting capabilities.
npsh Access Methods
This command shell can be accessed by:
•
built in HTML forms
•
a Telnet session from a TCP/IP host to the ethernet
•
a single remote shell command (e.g., rsh, rcmd, remsh) from a TCP/IP
host
Main npsh Command Prefixes
All configurable commands either start with store or set, and view
commands start with list.
NOTE: If the store prefix is used, the ethernet must be repowered to make
NOTE: If the set prefix is used, a save command must be executed as well
Commands
the changes take effect. Since store affects flash memory settings
only, the print server must reset and read the new settings now in
flash memory.
so that the new settings are retained after power cycles. Since set
only affects the settings in memory, they will be lost after a power
cycle unless they are saved to flash memory.
179