InfoPrint 6500 Series User Manual page 205

disable ioport|destination|tftp
Example: disable prn
Disable an I/O port so that queued jobs are not printed, or disable a
destination so jobs cannot be queued to it.
Example: disable tftp
Disables processing of a boot file located on a TFTP server.
enable ioport|destination|printermgr|tftp
Example: enable prn
Enable an I/O port so that queued jobs are printed, or enable a
destination so jobs can be queued to it.
Example: enable printermgr
Enables the printer debug port to allow remote printer management
software to function.
Example: enable tftp
Enables proccessing of a boot file located on a TFTP server.
close tcp TCPindexnumber
Example: close tcp 3
Close the a TCP/IP connection between a TCP/IP host and the NIC. The
TCPindexnumber can be retrieved from "debug tcp" output.
ping [-s] hostIPaddress [datasize [packetnumber]]
Example: ping 192.75.11.30
ping another TCP/IP host specified by hostIPaddress on the NIC
network. datasize is the datagram packet size which defaults to 64
bytes if no size is included in the syntax and packetnumber is the
number of requests to be sent.
NOTE: To use a host or IP name instead of the address, you must have set
the DNS server on the NIC. Use the command set sysinfo dns...
to do this.
telnet hostIPaddress [escapecharacter]
Example: telnet 192.75.11.35
Start a Telnet session with another TCP/IP host specified by
hostIPaddress on the NIC network. If escapecharacter is used, it
resets the key sequence used to exit the Telnet session. It will return you
to the telnet> prompt where you can execute quit. Use the keycode
command to find out exact escape characters if needed. The default
character is CTRL ].
NOTE: To use a host or IP name instead of the address, you must have set
the DNS server on the NIC. Use the command set sysinfo dns...
to do this.
tn dest destination start|stop
Example: tn dest d1prn start
Set the tn autoconnect flag temporarily, to enable (start) or disable (stop).
See "store tn dest destination [-]autoconnect" command for further
definition.
Miscellaneous Commands
205