Configuring A TCP/IP Host Table Entry
Although creating a TCP/IP host table entry is optional, it is a good idea to
take this step. Add the iSeries name and the IP address of the LAN adapter to
the "Host Table Entries."
Configuring The iSeries For Printing
To configure an iSeries for printing, you must:
•
•
You will need the following information:
Remote Printer Queue name
Set to 'd1prn' through 'd8prn'.
NOTE: The Remote Printer Queue name must be in lowercase letters. Do
NOTE: When the IPDS feature is installed, the queue name 'd4prn' is not
IP Address
The IP address for the ethernet.
Setting Up Printing For ASCII Files
The next step is to set up the remote printing capability. There are two ways to
do this: you can either specify the LPR parameters manually each time you
send a file to the printer, or use Remote Writer and a remote output queue for
automatic printing to the printer.
set up the printing capability, and
verify the setup with a print job.
not use "PASS."
available.
Configuring A TCP/IP Host Table Entry
113