Html Configuration Forms Will Not Display; Errors Occur When Defining An Lpr Printer; Cannot Browse The Ethernet Interface On The Network; Printer Errors When Printing Or No Output - InfoPrint 6500 Series User Manual

HTML Configuration Forms Will Not Display

•
Can you ping the ethernet from the Windows station? If not, refer to
"Ethernet Interface Cannot Be Found On The Network" on page 82.
•
Have you used the correct URL for the ethernet home page? It should be
http://EthernetInterfaceIPaddress
(e.g., http://192.75.11.9).
•
Is HTTP support enabled? If not, refer to "Web Browser/HTTP Problem"
on page 85.

Errors Occur When Defining An LPR Printer

•
Can you ping the ethernet from your Windows NT station? If not, please
refer to
"Ethernet Interface Cannot Be Found On The Network" on page 82.
•
Did you specify the correct IP address or host name for the ethernet in the
first field of the "Add LPR Compatible Printer" box?
•
Did you specify a valid destination/queue on the ethernet in the second
field of the "Add LPR Compatible Printer" dialogue box? If so, did you also
enter it in lowercase letters?

Cannot Browse The Ethernet Interface On The Network

•
Have you looked under the right Windows workgroup? By default, the
ethernet will be found under "WORKGROUP."
•
Are you able to browse other Windows stations and devices on the
network from this same station?
•
Has this Windows station been given enough time to update its registry so
it can see this newly added workgroup device? Sometimes Windows
stations can take considerable time, depending on the size of the
network.

Printer Errors When Printing Or No Output

•
Is there a large job currently printing which is taking up all of the printer
resources? Usually when printing from Windows 95/98 stations, a busy
printer can cause Windows to display a printer error message. This is
because it demands immediate printer attention rather than holding the
data until the printer is ready again. The best way around this is to use a
central spooling station like an NT server.
•
Have you tried restarting the spooler under "Control Panel:Services?"
Sometimes this is needed to get printing started.
NOTE: As a last resort, you may want to reboot the Windows station.
Sometimes this is the only option to completely clear this situation.
The ethernet usually has nothing to do with this problem.
HTML Configuration Forms Will Not Display
83