Logpath Type
Define what type of log information will be tracked for each print job passing
through the associated destination. The types are:
•
job - job ID, username, etc.
•
user - user ID and three messages per job about the start and finish
•
checksum - value used when troubleshooting integrity of data transferred
•
printer - miscellaneous messages from the printer
•
i/o port - status of the printer based on the port interface signals.
Logpath Port
Define where logging information for print jobs passing through the
associated destination will be reported. The choices are:
•
prn - reported to the PRN port
•
none - don't report any logging information
•
TCP/IP port - to a TCP port number (specified in the edit field)
•
syslog - to a host (specified by the IP address in the edit field) running a
SYSLOG daemon
•
email - to an e-mail address (specified by the e-mail address and the
SMTP server IP address edit fields). You can set the option on the
Administration web page.
Default: no logging turned on.
Log Path Configuration
Current Model Settings
55