Sco Setup - InfoPrint 6500 Series User Manual

Chapter 5

SCO Setup

SCO Setup
1. Login as a root or administrator privileges user.
2. Acquire an unused Internet address (IP) from your Network Administrator
and choose a unique name for the Ethernet.
3. Add your ethernet internet address and host name to your system host
table by appending the following line to the /etc/hosts file:
<Internet address>
Example:
199.230.23.76
4. If you have not installed the SCO RLP (BSD lpd) package which is part of
the TCP/IP package, run mkdev to invoke the RLP installation script:
#mkdev rip
The following screen displays:
Do you want to install or delete remote printing (i/d/q)?
Type i to install and press Enter or Return. The additional prompts
display.
Do you want to install or delete remote printing (i/d/q)? i
Installing Remote Line Printing
Remote line printing working directory already exists.
Now type y and press Enter or Return. y allows you to configure an LPD
printer. Type n and press Enter or Return.
n will exit.
96
Remote printing configuration
Remote printing configuration
<host name>
salesdept