InfoPrint 6500 Series User Manual page 199

set sysinfo email emailname@domain
Example: set sysinfo email joe@printronix.com
Define the user email address to receive printer and job logging
information from a particular logpath on the NIC.
set sysinfo syslog hostIPaddress
Example: set sysinfo syslog 192.75.11.30
Set the IP address of the host running the SYSLOG daemon. NIC
debugging or print job and printer logging information can be sent to that
IP address.
set sysinfo dns <IPaddress>
Example: set sysinfo dns 192.75.11.2
Set your DNS server IP address so the NIC can resolve host names when
used with its built-in Telnet and ping clients.
set sysinfo domain <NAME>
Example: set sysinfo domain printronix.com
Sets the domain name for the NIC, which when combined with the print
server name, forms the fully qualified domain name of the NIC.
set sysinfo module [[-]novell] [[-]netbios]
Example: set sysinfo module -novell
Enable and disable certain network protocol stacks within the NIC.
Sometimes it helps to disable any protocols you are not using on your
network.
NOTE: [ - ] novell option is not available on the Integrated NIC.
set user add|del <NAME>
Example: set user add eng
Add or remove a user on the NIC defined by <name>.
Do not delete the root user, or you will be unable to configure any
further settings on the print server. You will have to go back to factory
defaults to correct this problem.
set user passwd <NAME> [<PASSWORD>]
Example: set user passwd eng mplex1
Assign a password to a defined user on the NIC.
set user type <NAME> root|guest
Example: set user type eng root
Assign root or guest privileges to a particular user defined by username.
Guest permissions allow viewing of settings only. Root permissions allow
complete control of the NIC.
set user from default
Set all user settings back to factory defaults.
set user from stored
Set all current user settings to the values stored in flash memory.
IMPORTANT
Set Commands
199