InfoPrint 6500 Series User Manual page 182

Chapter 13
Complete Command List
Set the wireless channel number:
store ifc <IFNUM> wlan channel default <1-15>
<ifnum> is the interface number for the wireless device.
<channel-num> selects the RF channel number (1 to 15) used in ad-hoc
mode. The word "default" will inform the device driver to use the card's
factory set default channel.
Set wireless antenna type:
store ifc <IFNUM> wlan antenna diverse|primary|aux <ANTENNA-
TYPE>
<ifnum> is the interface number for the wireless device.
<antenna-type> is the type of antenna to be used: "primary", "aux"
(auxiliary or external) and "diverse". "diverse" allows the
WLAN card to decide on the optimal antenna during operation.
Set the wireless preamble length:
store ifc <IFNUM> wlan preamble default|long|short
<LEN-TYPE>
<ifnum> is the interface number for the wireless device.
<len-type> is the type of preamble length required. It can be
"long", "short", or "default". "default" allows the card to use its own factory-
default.
Set the wireless power management mode:
store ifc <IFNUM> wlan pmm on|off
<ifnum> is the interface number for the wireless device.
The string "off" disables power-save mode. "on" enables power-save
mode with a default sleep-time of 100ms.
Set wireless transmit power:
store ifc <IFNUM> wlan txpwr <0-100>
<ifnum> is the interface number for the wireless device.
<0-100> the power level as a percentage of full power .
Set wireless options:
store ifc <IFNUM> wlan opts [[-]intnl]
<ifnum> is the interface number for the wireless device.
An option is enabled by including it in the list and disabled by preceding it
with a '-' character in the list. Supported option is "intnl", for international
mode and "openauth" for open authentication.
Set the default key for wireless encryption:
store ifc <IFNUM> wlan defkey disable|<1-4>
<ifnum> is the interface number for the wireless device.
<1-4> is the number identifying one of the four keys (1-4). A value of zero
or the word "disable" disables encryption.
182