Table of Contents
Advertisement
Chapter 2. Installation, Attachment, and Configuration
Overview
The following is an overview of the steps you need to complete to successfully
install, attach, and configure your printer:
1. Unpack the printer from the shipping package. Follow the instructions
2. Set up the printer, which includes; removing shipping materials, installing the
3. Perform an initial print test by printing the current configuration page as
4. Review the information contained in the README.1ST file on the
© Copyright InfoPrint Solutions Company 2005, 2010
Note!
Before using this information and the product it supports, read the
information and Communication Statements in "Notices" on page 289.
DANGER
<4>
Do not connect or disconnect any communication port, teleport, attachment
connector, or power cord during an electrical storm.
<5>
Power off the printer and disconnect the power cord before connecting or
disconnecting communication port, teleport, or attachment cable connector.
provided on the shipping package.
ink transport assembly, ink transport media, ink cartridge, and loading paper.
Follow the instructions in InfoPrint 6500 Line Matrix Printers: Quick Start Guide.
described on page 28.
Configuration Utility section on the User's CD.
Note: The Configuration Utility section contains a README.1ST file that
describes the contents of the CD, AIX print drivers, and configuration
information for replacing existing InfoPrint Solutions Company printers.
In addition, there might be another file, called README.TXT that
contains information that was added after the printer documentation was
printed.
11
Advertisement
Table of Contents
